07-15-2021, 04:15 PM
Hi,
我连接RoboDK V5.2.4 Meca500 R3 v8.1.9, when running a simulation only on RoboDK, everything is good, when running the same program on robot (right click Run on robot), the real robot is moving good but the robot in the simulation is doing weird moves, and some times, I get message errors like singularity or no path possible because the robot in the simulation is not able to reach the position,
Do you have any suggestion about this issue ?
Best regards
我连接RoboDK V5.2.4 Meca500 R3 v8.1.9, when running a simulation only on RoboDK, everything is good, when running the same program on robot (right click Run on robot), the real robot is moving good but the robot in the simulation is doing weird moves, and some times, I get message errors like singularity or no path possible because the robot in the simulation is not able to reach the position,
Do you have any suggestion about this issue ?
Best regards