Programs produced by RoboDK for 3D print on KUKA KR6 (KRC4) cannot be selected

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Thread Modes

Programs produced by RoboDK for 3D print on KUKA KR6 (KRC4) cannot be selected

Andy

Member

Posts: 20
Threads: 4
Joined: Oct 2018
Reputation: 0

04-01-2019, 09:20

Hi Jeremy,

Please find the two zipped screen shot files as requested. I am sure it is only something simple but if you can assist me that would be great. As I said previously, Albert suggested using the KRC2 post processor. I have used both KRC2 & KRC4 posts for the KRC4 HMI but neither will allow selection of the program produced by RoboDK.

As you can see any teach-in type program produced on the robot selects and runs just fine.

Look forward to your suggestions by return.

Many Thanks

Andy

Attached Files
.zip

RoboDK File no select.zip(Size: 309.16 KB / Downloads: 467)
.zip

Teach in with Select.zip(Size: 255.28 KB / Downloads: 458)

Find

Messages In This Thread

Programs produced by RoboDK for 3D print on KUKA KR6 (KRC4) cannot be selected - byAndy- 03-28-2019, 01:12 PM

RE: Programs produced by RoboDK for 3D print on KUKA KR6 (KRC4) cannot be selected - byJeremy- 03-29-2019, 11:32 PM

RE: Programs produced by RoboDK for 3D print on KUKA KR6 (KRC4) cannot be selected - byAndy- 04-01-2019, 09:20 AM

RE: Programs produced by RoboDK for 3D print on KUKA KR6 (KRC4) cannot be selected - byDavidG- 04-01-2019, 10:09 AM

RE: Programs produced by RoboDK for 3D print on KUKA KR6 (KRC4) cannot be selected - byAndy- 04-02-2019, 09:05 AM

RE: Programs produced by RoboDK for 3D print on KUKA KR6 (KRC4) cannot be selected - byAlbert- 04-02-2019, 04:16 PM

RE: Programs produced by RoboDK for 3D print on KUKA KR6 (KRC4) cannot be selected - byAndy- 04-03-2019, 07:40 AM

RE: Programs produced by RoboDK for 3D print on KUKA KR6 (KRC4) cannot be selected - byJeremy- 04-04-2019, 02:44 AM

RE: Programs produced by RoboDK for 3D print on KUKA KR6 (KRC4) cannot be selected - byAndy- 04-04-2019, 07:18 AM

RE: Programs produced by RoboDK for 3D print on KUKA KR6 (KRC4) cannot be selected - byJeremy- 04-04-2019, 07:55 PM

RE: Programs produced by RoboDK for 3D print on KUKA KR6 (KRC4) cannot be selected - byAndy- 04-09-2019, 08:48 AM

RE: Programs produced by RoboDK for 3D print on KUKA KR6 (KRC4) cannot be selected - byJeremy- 04-09-2019, 09:01 PM

RE: Programs produced by RoboDK for 3D print on KUKA KR6 (KRC4) cannot be selected - byAndy- 06-19-2019, 09:25 AM

RE: Programs produced by RoboDK for 3D print on KUKA KR6 (KRC4) cannot be selected - byDavidG- 06-19-2019, 08:30 PM

RE: Programs produced by RoboDK for 3D print on KUKA KR6 (KRC4) cannot be selected - bynaveen24- 12-20-2021, 09:07 AM

Users browsing this thread:

1 Guest(s)