03-28-2019, 01:12点
Hi Jeremy,
I have a couple of problems having now successfully made network connection between the Robot and RoboDK :
Firstly,the programs created by RoboDK (3d printing) cannot be selected on the HMI. (All teach-in programs created on the Robot select and work ok in all modes on the Robot). They appear to be .src files and the format looks ok. I have also tried using KRC2 & 4 posts as suggested by Albert...but makes no difference.( I have sent screen shots to Albert as they are too large to attach on this forum) Please help as I need to get this platform working now.
Secondly,When trying to control the robot motion from RoboDk it is very jerky, erratic and unpredictable is there something that can be done to rectify this in the settings ??
Hopefully you can get the screen shot from Albert and give me some info to retify these issues by return.
Many Thanks
Andy
I have a couple of problems having now successfully made network connection between the Robot and RoboDK :
Firstly,the programs created by RoboDK (3d printing) cannot be selected on the HMI. (All teach-in programs created on the Robot select and work ok in all modes on the Robot). They appear to be .src files and the format looks ok. I have also tried using KRC2 & 4 posts as suggested by Albert...but makes no difference.( I have sent screen shots to Albert as they are too large to attach on this forum) Please help as I need to get this platform working now.
Secondly,When trying to control the robot motion from RoboDk it is very jerky, erratic and unpredictable is there something that can be done to rectify this in the settings ??
Hopefully you can get the screen shot from Albert and give me some info to retify these issues by return.
Many Thanks
Andy