09-02-2021, 06:54 AM
Can you do this instead?
Follow these steps to connect to the robot from RoboDK:
1.Right click the robot in RoboDK
2.Select: Connect to robot
3.Enter the IP of the robot and the port number
4.Select Connect.
There should be a green message displaying Ready if the connection succeeded. More on the link here://m.sinclairbody.com/doc/en/Robots-Univers...l#DriverUR
Let me know if you still face issues.
Follow these steps to connect to the robot from RoboDK:
1.Right click the robot in RoboDK
2.Select: Connect to robot
3.Enter the IP of the robot and the port number
4.Select Connect.
There should be a green message displaying Ready if the connection succeeded. More on the link here://m.sinclairbody.com/doc/en/Robots-Univers...l#DriverUR
Let me know if you still face issues.