+- RoboDK Forum (//m.sinclairbody.com/forum)
+-- Forum: RoboDK (EN) (//m.sinclairbody.com/forum/Forum-RoboDK-EN)
+ - - -论坛:RoboDK错误(//m.sinclairbody.com/forum/Forum-RoboDK-bugs)
+——线程:库卡KR C4postprocessor (/Thread-Kuka-KR-C4-postprocessor)
Kuka KR C4 postprocessor-parisgg-05-16-2018
Hi,
within the online simulation of my Kuka Kr 3 R540 with a KR C4 machine the tool positioning went always back to the $Nullframe since it is a set value within the server software of RoboDK. After commenting it out everything worked fine (within the .src file i saw that there was the line $Tool = {0 0 0 0 0 0}).
Furthermore, the speed and acceleration (for both linear and joint movement) I set for the simulation have not been sent to the machine while online simulating it. I haven't taken a look at the .src file but i guess it is a hard programmed value in there as well.
Regards