[Aryan Yashaswi]

Smiley station.rdk(Size: 1.18 MB / Downloads: 211)Whenever I import a G code file along with the 3D STEP file in the RoboDK station, they are imported in different places and also have a strange distance constraint which prevents the overlap of both of them. Also in my CAM software all the operations were done from the top plane but the RoboDK software tries to do this operation at a 90 degree angle which results in the robot not reaching the targets. Pls help. I'm attaching the RoboDK station.

[Jeremy]

Hi,

你能提供你Gcode进口吗ed? I'll check for the orientation issue.

The reason why the path and the part do no match is that the origin of the part (CAD software) does not match with the origin of the machining setup (CAM software).

Jeremy

[Aryan Yashaswi]

Hi,

你能提供你Gcode进口吗ed? I'll check for the orientation issue.

The reason why the path and the part do no match is that the origin of the part (CAD software) does not match with the origin of the machining setup (CAM software).

Jeremy

I've attached the requested Gcode file.