+- RoboDK Forum (//m.sinclairbody.com/forum)
+-- Forum: RoboDK (EN) (//m.sinclairbody.com/forum/Forum-RoboDK-EN)
+ - - -论坛:RoboDK错误(//m.sinclairbody.com/forum/Forum-RoboDK-bugs)
+--- Thread: Rendering issues (/Thread-Rendering-issues)
Rendering issues-gipfeli-01-05-2021
I'm currently testing out a small robot arm from China (mirobot), and needed to import the .stl files into RoboDK
- stl files:https://github.com/wlkata/Mirobot-STL
- Manual (parameter):https://lin-nice.github.io/mirobot_gitbook_en/13-wlkata.html
The parts are not rendered (No problem with .robot files from library). The workspace however is displayed.
Any help would be very appreciated.
Thank you and have a nice day.
RE: Rendering issues-Jeremy-01-06-2021
Hi Gipfeli,
Can you provide the .rdk file you used.
Jeremy
RE: Rendering issues-gipfeli-01-06-2021
(01-06-2021, 02:17 PM)Jeremy Wrote:Hi Gipfeli,
Can you provide the .rdk file you used.
Jeremy
Sure, here you go.https://drive.google.com/file/d/18yYSX2clf9EormtI392MRE1AXOxm058m/view?usp=sharing
Thank you very much.
RE: Rendering issues-Jeremy-01-07-2021
Hi Gipfeli,
I'm not so sure what's going on, but your mesh (.stl) smees a bit broken.
I tried opening them with a CAD software (Fusion 360) and the result was quite strange.
Could you save the parts as either .step or .iges instead of .stl?
I would recommend those formats over .stl.
Jeremy