07-28-2021, 02:48 AM
Hi sirs,
I'm using a Fanuc LR Mate 200id robot, version is 8.20 (fanuc r-30ib), and user socket messaging (R-648) has been installed.
followed the page://m.sinclairbody.com/doc/en/Robots-Fanuc.htmlto install RoboDK driver for Fanuc,
1.go_mc转让。tp, go_mj。tp, go_ml.tp go_prog.tp and RDK_S3.PC (in V6-V7-V8 folder) to teach pendant
2. set $HOSTS_CFG [3].SERVER_PORT=2000 OK and set S3 started.
3. fail to find RDK_S3.PC (nor drvierrdk_S3) after press SELECT button in teach pendant
file has loaded to MD of teach pendant (a.jpg) , but not in SELECT page (b.jpg).
Is any step I did wrong?
I'm using a Fanuc LR Mate 200id robot, version is 8.20 (fanuc r-30ib), and user socket messaging (R-648) has been installed.
followed the page://m.sinclairbody.com/doc/en/Robots-Fanuc.htmlto install RoboDK driver for Fanuc,
1.go_mc转让。tp, go_mj。tp, go_ml.tp go_prog.tp and RDK_S3.PC (in V6-V7-V8 folder) to teach pendant
2. set $HOSTS_CFG [3].SERVER_PORT=2000 OK and set S3 started.
3. fail to find RDK_S3.PC (nor drvierrdk_S3) after press SELECT button in teach pendant
file has loaded to MD of teach pendant (a.jpg) , but not in SELECT page (b.jpg).
Is any step I did wrong?