02-04-2021, 10:07 AM
Hi Jeremy,
thank you for your reply. With your advice we completed about 80% of the specimens, thank you. However, there remains a problem. Attached you find the files I am desperately working on.
We want to 3D-Print a standing block and cut specimens out. However the condition: The melt coming out of the nozzle need to be constantly dragged behind the nozzle. This works out just fine for the first strand at the side.
However, once the the robot moves to the actual block, the tool starts to tilt strangely. I tried tinkering with the values, but with no success. The problem persists with smaller blocks, I added to the attachment.
我已经成功的改变了“路径工具偏移et" to 15 degrees at the 2nd rotational axis .
The
I would like to know, what causes the robot to behave like this, and how can I keep the melt constantly behind or in front of the nozzle?
Your help is much appreciated.
Greetings from Germany,
Maurice
thank you for your reply. With your advice we completed about 80% of the specimens, thank you. However, there remains a problem. Attached you find the files I am desperately working on.
We want to 3D-Print a standing block and cut specimens out. However the condition: The melt coming out of the nozzle need to be constantly dragged behind the nozzle. This works out just fine for the first strand at the side.
However, once the the robot moves to the actual block, the tool starts to tilt strangely. I tried tinkering with the values, but with no success. The problem persists with smaller blocks, I added to the attachment.
我已经成功的改变了“路径工具偏移et" to 15 degrees at the 2nd rotational axis .
The
I would like to know, what causes the robot to behave like this, and how can I keep the melt constantly behind or in front of the nozzle?
Your help is much appreciated.
Greetings from Germany,
Maurice