04-08-2020, 06:46 PM
Bonjour Ned,
Ok, I figured out your problem.
It will be easy to fix.
Right now you are not able to pick the part because the distance between the TCP and the Object Reference is higher than the default setting.
The default setting is 200 mm.
The distance is shown in the picture below.
You can see the object reference by right-clicking the object and selecting "Visible Object Reference".
Know you can fix that issue in three different ways.
1 - Modify the position of the object reference.
To do so, you can either hold "Alt + Shift" and move the object reference manually or double-click the object to show the object panel, "More options" and use the text box to modify the position of the geometry. Click "Apply move" when you are done.
2 - Change the default maximum grabbing distance.
To do so, "Tools"->"Options"->"General"
在窗口的底部,你should see "Maximum distance to attach an object". Simply increase that value.
3 - Change the default type of attaching command use from "object reference" to "object surface".
To do so, "Tools"->"Options"->"General"
在窗口的底部,你should see "Check shortest distance between TCP and object shape". Active that option.
Have a great day.
Jeremy
Ok, I figured out your problem.
It will be easy to fix.
Right now you are not able to pick the part because the distance between the TCP and the Object Reference is higher than the default setting.
The default setting is 200 mm.
The distance is shown in the picture below.
You can see the object reference by right-clicking the object and selecting "Visible Object Reference".
Know you can fix that issue in three different ways.
1 - Modify the position of the object reference.
To do so, you can either hold "Alt + Shift" and move the object reference manually or double-click the object to show the object panel, "More options" and use the text box to modify the position of the geometry. Click "Apply move" when you are done.
2 - Change the default maximum grabbing distance.
To do so, "Tools"->"Options"->"General"
在窗口的底部,你should see "Maximum distance to attach an object". Simply increase that value.
3 - Change the default type of attaching command use from "object reference" to "object surface".
To do so, "Tools"->"Options"->"General"
在窗口的底部,你should see "Check shortest distance between TCP and object shape". Active that option.
Have a great day.
Jeremy