05-06-2022, 04:01 PM
We realized the image you see is incorrect as it does not properly describe the points you should take. The current calibration method you are using requires you to take the first point at the origin.
We just updated RoboDK to correct this and properly reflect the calibration method you selected.
另外, if you used the points depicted in the image you shared, you can select the second calibration method (point 1 doesn't need to be measured at the origin of the reference frame).
We just updated RoboDK to correct this and properly reflect the calibration method you selected.
另外, if you used the points depicted in the image you shared, you can select the second calibration method (point 1 doesn't need to be measured at the origin of the reference frame).