[Luc Marechal]

Important:
For the RobotiQ gripper to work using the driver as described in this email, make sure to use the same file I sent on May 25th:

1. You can take the following script file:
   //m.sinclairbody.com/files/upload/progrobodk-rq.zip
   
2. And unzip the progrobodk.script file here:
   C:/RoboDK/bin/progrobodk.script
   
3. Make sure to restart the driver if it was running (double click Disconnect, then, Connect).
   

Keep an eye on the UR logs to see if anything fails on the robot side as well.

Hi Jeremy,
The link to theprogrobodk-rq.zipfile is dead. Could you please send it again ?
Thanks a lot.
Luc