11-30-2021, 06:16 PM
Hi,
We are working on a sanding project using ROBODK.
We are experiencing some issues when using curve follow project. Kindly clarify the following points
1) When choosing multiple curves how to change the direction with respect to the surface of the object
2) After selecting curves how to orient the robot to follow a path at a specified orientation
3) Im attaching a program file which we are trying , kindly take a look at it and provide some pointers on how to program it more efficiently.
POLISHING1 =RBDK.rdk(Size: 4.49 MB / Downloads: 201)
We are working on a sanding project using ROBODK.
We are experiencing some issues when using curve follow project. Kindly clarify the following points
1) When choosing multiple curves how to change the direction with respect to the surface of the object
2) After selecting curves how to orient the robot to follow a path at a specified orientation
3) Im attaching a program file which we are trying , kindly take a look at it and provide some pointers on how to program it more efficiently.
POLISHING1 =RBDK.rdk(Size: 4.49 MB / Downloads: 201)