08-25-2021, 03:49 PM
I managed to connect the robot.
For those who have the same problem:
1- Connect Lan cable to X66 port.
2 - SmartP“默认网关”ad in Settings --> Start-up --> Network Configuration to the same value as IP address (172.31.1.147 by default).
For those who have the same problem:
1- Connect Lan cable to X66 port.
2 - SmartP“默认网关”ad in Settings --> Start-up --> Network Configuration to the same value as IP address (172.31.1.147 by default).