+- RoboDK Forum (//m.sinclairbody.com/forum)
+-- Forum: RoboDK (EN) (//m.sinclairbody.com/forum/Forum-RoboDK-EN)
+——um: RoboDK bugs (//m.sinclairbody.com/forum/Forum-RoboDK-bugs)
+--- Thread: Panasonic G3 CSR - post processor problem (/Thread-Panasonic-G3-CSR-post-processor-problem)
松下G3 CSR——后置处理程序问题-Bartek-03-30-2022
Hi,
I have a problem with the post-processor generating a CSR file from the manual. Namely, I choose the "Panasonic G3 CSR" post-processor and I get the error attachment.
What could be caused by this and how to fix it to obtain *.CSR file for Panasonic TM-1400 robot?
Below I have also added the simple program that I want to generate.
It's probably about a turntable that gives an additional value in the line, but then how can you generate a program with a turntable?
RE: Panasonic G3 CSR - post processor problem-Jeremy-03-30-2022
Hi Barket,
Looks like our Panasonic post-processor doesn't handle external axes. Seems like no one asked for it before.
If you own a professional version of RoboDK, you can select "Help"->"Request support" and we will be happy to improve our post-processor to support your setup.
Jeremy