+- RoboDK Forum (//m.sinclairbody.com/forum)
+-- Forum: RoboDK (EN) (//m.sinclairbody.com/forum/Forum-RoboDK-EN)
+ - - -论坛:通用RoboDK问题(//m.sinclairbody.com/forum/Forum-General-questions-about-RoboDK)
+--- Thread: SolidWorks RoboDK Fanuc R2000iB 210F (/Thread-SolidWorks-RoboDK-Fanuc-R2000iB-210F)
Pages:
1
2
SolidWorks RoboDK Fanuc R2000iB 210F-Mekeale-03-25-2022
Привет. программирование робота в роботке. Я создаю траекторию с помощью SolidWorks. Линии все прямые, а по факту получается со смещением. подскажите, что можно, или скачать другую программу на место солидворкс и там попробовать?
RE: solidworks robodk fonuc r 2000ib 210f-Jeremy-03-25-2022
This looks more like a robot setup problem than a software problem.
How did you set up your tool and how did you set up your frame?
Jeremy
RE: solidworks robodk fonuc r 2000ib 210f-Mekeale-03-25-2022
[quote=
RE: solidworks robodk fonuc r 2000ib 210f-Jeremy-03-25-2022
I'm sure they are the same in RDK and in the controller but are they right?
What I mean by that is, does your in the virtual environment matches with your part in the real environment.
https://youtube.com/playlist?list=PLjiA6TvRACQd8Zju_r_VSL7LBNEmBE57E
RE: solidworks robodk fonuc r 2000ib 210f-Mekeale-03-26-2022
thanks. I will try.
RE: solidworks robodk fonuc r 2000ib 210f-Mekeale-03-28-2022
did everything as in the video. in 2d processing is good, in 3d there are displacements.
RE: SolidWorks RoboDK Fanuc R2000iB 210F-Mekeale-03-28-2022
I have an r 30ia controller. fanuc rj3 postprocessor works and r30ia postprocessor doesn't load into controller ?
RE: SolidWorks RoboDK Fanuc R2000iB 210F-Albert-03-28-2022
What error message do you see when you load the file?
RE: SolidWorks RoboDK Fanuc R2000iB 210F-Mekeale-03-28-2022
RE: SolidWorks RoboDK Fanuc R2000iB 210F-Albert-03-28-2022
可以you share the complete error log? We are unable to help you troubleshoot without more information.