+- RoboDK Forum (//m.sinclairbody.com/forum)
+-- Forum: RoboDK (EN) (//m.sinclairbody.com/forum/Forum-RoboDK-EN)
+ - - -论坛:通用RoboDK问题(//m.sinclairbody.com/forum/Forum-General-questions-about-RoboDK)
+--- Thread: Questions about Curve Follow Project. (/Thread-Questions-about-Curve-Follow-Project)
Questions about Curve Follow Project.-CMMMC-01-20-2022
Can't we combine them into one when the curves overlap as shown in the picture below?
RE: Questions about Curve Follow Project.-Jeremy-01-20-2022
Did you use the "edit path setting"->"Offset" to have this result?
If so you need to delete a few points from the selected path.
Go to "Tools"->"Modify Curve" -> "Right-click" a point -> "Delete Curve Point"
JEremy
RE: Questions about Curve Follow Project.-CMMMC-01-21-2022
If you use "delete curve point", the line changes weirdly. I want a smooth path.
RE: Questions about Curve Follow Project.-Jeremy-01-21-2022
Yeah, this is not a bulletproof feature.
Do you use a CAD software? If so, which one?
RE: Questions about Curve Follow Project.-CMMMC-01-23-2022
I'm using inventor
RE: Questions about Curve Follow Project.-Jeremy-01-24-2022
Great, did you see we have a plugin for Inventor?
//m.sinclairbody.com/doc/en/Plugin-Inventor.html#PluginInventor
CAD softwares such as Inventor are WAY better at doing CAD work like offsetting lines and stuff.
如果我was you, I would create the offset path directly in Inventor and bring it to RDK. Take a look at the tutorials in the previous link or this one from our SolidWorks plugin (works the same as the Inventor one and showcase the line offset)
https://youtu.be/IkiwigxWPow
Jeremy