+- RoboDK Forum (//m.sinclairbody.com/forum)
+-- Forum: RoboDK (EN) (//m.sinclairbody.com/forum/Forum-RoboDK-EN)
+--- Forum: General questions about RoboDK (//m.sinclairbody.com/forum/Forum-General-questions-about-RoboDK)
+--- Thread: Problem With Post Processor (/Thread-Problem-With-Post-Processor)
Problem With Post Processor-Otto_Scho-04-27-2021
Hello,
I have two issues :
减记更新ROBODK 5.2.2,我不能了Add/Edit the Post Processor from the Program menu.
2- for Staubli TX2-160L Robot/ Post Pro.:Staubli VAL 3
When I send the generated program to the robot, I become always the error "Invalid Library".
Please see the Photo!
BR
RE: Problem With Post Processor-Otto_Scho-04-28-2021
The Fehler message is:
"Fehler in line 15. The library is not available."
when I checked the generated program, I didn't found that library (tool date), and also there is no path called (saveChangeTool).
Any ideas !!
RE: Problem With Post Processor-Albert-04-29-2021
You'll find the dependency here:
//m.sinclairbody.com/forum/Thread-Staubli-val3-libraries-missing?pid=1026#pid1026
You may need other dependencies if you use your Stäubli robot for robot machining. I recommend you to contact Stäubli for these tools.