+- RoboDK Forum (//m.sinclairbody.com/forum)
+-- Forum: RoboDK (EN) (//m.sinclairbody.com/forum/Forum-RoboDK-EN)
+ - - -论坛:RoboDK错误(//m.sinclairbody.com/forum/Forum-RoboDK-bugs)
+--- Thread: FANUC CRX-10iA Wrong on RoboDK Online Library (/Thread-FANUC-CRX-10iA-Wrong-on-RoboDK-Online-Library)
FANUC CRX-10iA Wrong on RoboDK Online Library-dcrocha-02-15-2021
Hello,
I was trying to do an application with the FANUC CRX-10iA and it seemed the dimensions were wrong. I measured them and they were in fact not correct.
I compared with the CRX-10iA/L and basically when you download the CRX-10iA, you actually get the CRX-10iA/L.
(When you download the CRX-10iA/L you get the right robot with the right dimensions.)
RE: FANUC CRX-10iA Wrong on RoboDK Online Library-Jeremy-02-15-2021
Hi Dcrocha,
That's for bringing up the issue.
We'll try to fix that in a timely manner.
Jeremy
RE: FANUC CRX-10iA Wrong on RoboDK Online Library-Albert-02-16-2021
The issue is now fixed. Thank you for pointing this out.
You'll find the latest version for both Fanuc CRX robots attached.