+- RoboDK Forum (//m.sinclairbody.com/forum)
+-- Forum: RoboDK (EN) (//m.sinclairbody.com/forum/Forum-RoboDK-EN)
+--- Forum: RoboDK bugs (//m.sinclairbody.com/forum/Forum-RoboDK-bugs)
+--- Thread: Fusion 360 pluggin CAM path error (/Thread-Fusion-360-pluggin-CAM-path-error)
Fusion 360 pluggin CAM path error-Oxbown-10-16-2020
Hi to everyone!
I found a mistake on the RoboDK/Fusion360 combo. When I program a helix ramp on Fusion 360 CAM like the image (helix ramp path on red color)
[attachment=1434]
接下来,我导出凸轮RoboDK使用插件。The spiral has not the right orientation. See the image.
[attachment=1435]
This could be an error on the postprocessor of Fusion360 or an error on the RoboDK side.
I attach the CAM file in the post.[attachment=1436]
Thanks guys and keep rocking with RoboDK.
Update.
I used the post processor menu in Fusion 360 with the FANUC post.[attachment=1437]
I open the CNC file manually in Robodk and the helix path is correctly imported.
[attachment=1438]
Seems like the post-processor that uses the plugin is not the best.
RE: Fusion 360 pluggin CAM path error-Albert-10-20-2020
Hi Oxbrown,
Thank you for the detailed report about importing CAM files from Autodesk Fusion 360 to RoboDK.
We just released a new update so you can import spirals using the default APT post processor from Fusion:
//m.sinclairbody.com/downloads/Install-RoboDK-64-v5.1.2.exe
Let us know if you find any other issues.
Albert
RE: Fusion 360 pluggin CAM path error-Albert-10-28-2020
Hi Oxbown,
Can you provide the APT file when you use the post Common ISO 4343 APT in Fusion? (or the f3d file)
This update has actually created other bugs, mostly related to an internal tolerance to consider arcs as helix moves vs. circular moves.
Thank you,
Albert