+- RoboDK Forum (//m.sinclairbody.com/forum)
+-- Forum: RoboDK (EN) (//m.sinclairbody.com/forum/Forum-RoboDK-EN)
+--- Forum: General questions about RoboDK (//m.sinclairbody.com/forum/Forum-General-questions-about-RoboDK)
+--- Thread: Failed to generate program with FANUC RJ3 post processor (/Thread-Failed-to-generate-program-with-FANUC-RJ3-post-processor)
Failed to generate program with FANUC RJ3 post processor-Hiroe Ota-10-09-2020
I got an error as below photo when I tried to generate Fanuc RJ3 post processor.
It says, “Failed to generate program 1 using FANUC RJ3 post processor ” in Japanese.
I hope someone could solve this issue.
RE: Failed to generate program with FANUC RJ3 post processor-Jeremy-10-09-2020
Hi Hiroe,
That's strange.
I don't think that post V36 is included in the RDK release anymore.
Can you take a look at "C:/RoboDK/Posts and see if the v36 folder exists?
Otherwise, simply right-click the program -> "Select post-processor" and select the RJ3 from the list.
That should link to the latest version of the post.
Let me know if it still doesn't work.
Jeremy
RE: Failed to generate program with FANUC RJ3 post processor-Hiroe Ota-10-12-2020
Dear Jeremy,
Thank you for your quick reply.
However, there was no v36 folder at"C:/RoboDK/Posts", and it does not work if I selecting RJ3 from the list.
I added a video explaining the error in program generation with RJ3 post processor.
I hope any clue would be found to solve this issue.
Best Regards,
RE: Failed to generate program with FANUC RJ3 post processor-Jeremy-10-12-2020
Hi Hiroe,
Very strange.
Are you able to use any other post-processor? Or is this one the only problematic one?
If they are all problematic, go to "Tools"->"Options"->"Python" and make sure that the python37 is selected in the first text box.
If the RJ3 is the only one you are having problems with, try replacing the one you have with this one in the attachment.
Jeremy
RE: Failed to generate program with FANUC RJ3 post processor-Hiroe Ota-10-13-2020
Dear Jeremy,
安装最新的后解决了这个问题version and selecting python37.
Thank you for your kind guidance!
Hiroe Ota