+- RoboDK Forum (//m.sinclairbody.com/forum)
+-- Forum: RoboDK (EN) (//m.sinclairbody.com/forum/Forum-RoboDK-EN)
+ - - -论坛:通用RoboDK问题(//m.sinclairbody.com/forum/Forum-General-questions-about-RoboDK)
+--- Thread: Imported curves not the same orientation as drawn in SW (/Thread-Imported-curves-not-the-same-orientation-as-drawn-in-SW)
Imported curves not the same orientation as drawn in SW-mmccrea_BAT-10-06-2020
I apologize for the earlier double post please remove the extra one if possible.
When I import my curves from solid works and then nest the curves into the frame, the curves are never normal to the Z axis in RoboDK even though they are normal to the z axis in SW.
How can I fix this.
Thank you
Mark
RE: Imported curves not the same orientation as drawn in SW-Olivier-10-06-2020
Hi mmcrea_BAT,
To adjust this, open the settings in the RoboDK plugin and select Map Z axis towards the top.
Olivier